Low concentration zinc oxide nanoparticles enrichment enhances bacterial and pro-inflammatory resistance of calcium silicate-based cements.

Calcium silicate-based cement (CSC) is a commonly used material in endodontic treatment. However, it has limited antibacterial activity, especially for cases involving primary infections. Zinc oxide nanoparticles (ZnO-NPs) are recognized for their potential in biomedical applications due to their antibacterial properties and ability to reduce inflammation. This study aims to optimize CSC by incorporating ZnO-NPs to maintain its physical properties, enhance its antibacterial activity, and reduce the production of pro-inflammatory cytokines. ZnO-NPs were integrated into a commercial CSC (Endocem MTA) at 1 wt% (CSZ1) or 3 wt% (CSZ3). Setting time, compressive strength, and X-ray diffraction were then measured. In addition, pH, calcium ion release, and zinc ion release were measured for 7 days. Antibacterial activity against Enterococcus faecalis and viability of murine macrophages (RAW264.7) were determined using colorimetric assays. Gene expression levels of pro-inflammatory cytokines in lipopolysaccharide induced RAW264.7 were evaluated using quantitative polymerase chain reaction. Results were compared to an unmodified CSC group. In the CSZ3 group, there was a significant increase of approximately 12% in setting time and a reduction of about 36.4% in compressive strength compared to the control and CSZ1 groups. The presence of ZnO-NPs was detected in both CSZ1 and CSZ3. Both CSC and CSZ1 groups maintained an alkaline pH and released calcium ions, while zinc ions were significantly released in the CSZ1 group. Additionally, CSZ1 showed a 1.8-fold reduction of bacterial activity and exhibited around 85% reduction in colony-forming units compared to the CSC group. Furthermore, the CSZ1 group showed a more than 39% reduction in pro-inflammatory cytokine levels compared to the CSC group. Thus, enriching CSC with 1 wt% ZnO-NPs can enhance its antibacterial activity and reduce pro-inflammatory cytokines without showing any tangible adverse effects on its physical properties.

Thermophysical properties and bonding with composite resin of premixed mineral trioxide aggregate for use as base material.

Dental bases require low thermal conductivity and good mechanical properties, such as bonding with composite resins. This study aims to elucidate the physicochemical properties of premixed mineral trioxide aggregate (MTA) for its suitability as a dental base and to explore the optimal adhesive strategy with composite resin. The thermal conductivity and compressive strength of this premixed MTA are 0.12 W/(m•K) and 93.76 MPa, respectively, Which are deemed adequate for its application as dental base. When bonded to composite resin, the use of 37% phosphoric acid etching before applying the Clearfil SE bond significantly reduced the bonding strength between composite resin and premixed MTA. This was because the compressive strength and Vickers hardness of premixed MTA decreased, and tricalcium silicate was dissolved from the surface during acid etching. Therefore, it is recommended to avoid using 37% phosphoric acid etching when bonding premixed MTA and composite resin as a dental base.

Occlusive membranes for guided regeneration of inflamed tissue defects.

Guided bone regeneration aided by the application of occlusive membranes is a promising therapy for diverse inflammatory periodontal diseases. Symbiosis, homeostasis between the host microbiome and cells, occurs in the oral environment under normal, but not pathologic, conditions. Here, we develop a symbiotically integrating occlusive membrane by mimicking the tooth enamel growth or multiple nucleation biomineralization processes. We perform human saliva and in vivo canine experiments to confirm that the symbiotically integrating occlusive membrane induces a symbiotic healing environment. Moreover, we show that the membrane exhibits tractability and enzymatic stability, maintaining the healing space during the entire guided bone regeneration therapy period. We apply the symbiotically integrating occlusive membrane to treat inflammatory-challenged cases in vivo, namely, the open and closed healing of canine premolars with severe periodontitis. We find that the membrane promotes symbiosis, prevents negative inflammatory responses, and improves cellular integration. Finally, we show that guided bone regeneration therapy with the symbiotically integrating occlusive membrane achieves fast healing of gingival soft tissue and alveolar bone.

Dimensional accuracy, mechanical property, and optical stability of zirconia orthodontic bracket according to yttria proportions.

This in vitro study evaluated comprehensively the performances of zirconia brackets with varying yttria proportions in manufacturing advanced orthodontic brackets. Three experimental groups of zirconia brackets were fabricated using yttria-stabilized zirconia (YSZ) materials with different yttria proportions-3 mol% yttria (3Y-YSZ), 4 mol% yttria (4Y-YSZ), and 5 mol% yttria (5Y-YSZ) (Tosoh Ceramic, Japan). A polycrystalline alumina ceramic bracket (3M™ Clarity™ Advanced, MBT 0.022-in. slot) was employed as the control group. Morphological properties, including slot surface structure and dimensions, were examined using scanning electron microscopy and surface profiler analysis. Manufacturing accuracy was assessed with root mean square calculations of trueness and precision. Mechanical properties were tested, encompassing static and kinetic frictional resistance (FR) and fracture strength. Optical stability was evaluated through 20,000 cycles of thermocycling and a 7-day immersion in various coloring agents. Within the limitations of this study, zirconia brackets containing 3 to 5 mol% YSZ presented enhanced reliability in terms of dimensional accuracy and demonstrated favorable optical stability. Notably, owing to its advantageous mechanical properties, the 3Y-YSZ variant showed remarkable potential as an advanced material for fabricating orthodontic brackets.

Mechanical properties and sustainable bacterial resistance effect of strontium-modified phosphate-based glass microfiller in dental composite resins.

Dental composite resins are widely used in dental restorations. However, their clinical application is limited by the occurrence of secondary caries. Strontium-modified phosphate-based glass (Sr-PBG) is a material known to have a sustainable bacterial resistance effect. The mechanical properties (in particular, flexural strength, modulus of elasticity, and hardness) of dental materials determine their function. Therefore, this study aimed to investigate the mechanical and ion-releasing properties as well as the sustainable bacterial resistance effect of bioactive resin composites containing Sr-PBG. The data were analyzed by ANOVA and Tuckey's tests (p < 0.05). We incorporated a Sr-PBG microfiller at 3, 6, and 9 wt.% concentrations into a commercially available composite resin and investigated the mechanical properties (flexural strength, elastic modulus, and micro hardness), ion release characteristics, and color of the resultant resins. In addition, we examined the antibacterial effects of the composite resins against Streptococcus mutans (S. mutans). The mechanical properties of the Sr-PBG groups differed only slightly from those of the control group (p > 0.05). However, the optical density at 600 nm of S. mutans incubated on the experimental group was significantly lower compared to that observed with the control (p < 0.05) both before and after thermocycling between 5 and 55 â„ƒ for 850 cycles (dwell time: 45 s). Therefore, strontium-modified resin materials exhibited a sustainable bacterial resistance effect in vitro while maintaining some of the mechanical properties of ordinary acrylic resins.

A novel orthodontic adhesive containing zinc-doped phosphate-based glass for preventing white spot lesions.

OBJECTIVES: This study aimed at demonstrating the remineralization effect of the enamel around the brackets to aid reduction in white spot lesions (WSLs) with use of zinc-doped phosphate-based glass (Zn-PBG) containing orthodontic adhesives. METHODS: Zn-PBG powder was synthesized, and particle morphology, size, and density were evaluated. Orthodontic adhesives with increasing loading percentage of Zn-PBG powder were prepared: ZnPG3 (3 wt.%), ZnPG6 (6 wt.%), and ZnPG9 (9 wt.%). Brackets were bonded on the etched enamel surface and stored in distilled water (DW) for 1 h. Following, Shear bond strength (SBS) along with adhesive remnant index were analyzed. The release of calcium (Ca), phosphorus (P), and zinc (Zn) from adhesive specimens in DW was evaluated after 7, 15 and 30 days of immersion. The remineralization effect was confirmed by microhardness and surface morphology analysis with scanning electron microscopy. RESULTS: The SBS value was observed between 20 and 22 MPa on enamel surface. The concentration of Ca, P and Zn released in DW increased with loading percentage of Zn-PBG. The microhardness increased in the experimental groups after immersion in artificial saliva for 7 days. Apatite-like crystal formation was observed after 30 days in the ZnPG 9 group. CONCLUSIONS: The orthodontic adhesive containing Zn-PBG with an optimal SBS performance has an enamel remineralization effect, and therefore can aid in prevention of WSLs. CLINICAL SIGNIFICANCE: The orthodontic adhesive containing Zn-PBG is clinically advantageous as it can promote remineralization and resist the formation of WSLs that may occur during orthodontic therapy.

Quantitative light-induced fluorescence enables effective detection of orthodontic adhesive residues in diverse environments.

BACKGROUND: Adhesive remnants post-orthodontic treatment might have deleterious effects on oral health, including enamel demineralization, plaque accumulation, and elevated risk of caries development. The aim of this study was to identify and characterize adhesive residues in an ex vivo environment rich in salivary microbiota using quantitative light-induced fluorescence (QLF) technology. METHODS: Disc-shaped adhesive samples with thickness ranging from 800 to 100 µm were prepared using GC Ortho, GOTO, T Orthobond, and Transbond XT and subsequently evaluated utilizing a QLF system. Bovine teeth containing GC Ortho and GOTO adhesives and isolated human premolar teeth bonded with brackets were subjected to a 10-day incubation in an artificial saliva environment. Daily imaging was conducted using QLF during incubation. Data with ΔR > 30% and simple hygiene score (SHS) were obtained with a software for further analysis. RESULTS: Fluorescence intensity exhibited significant differences among the four orthodontic adhesives (p < 0.05). Results of incubation in artificial saliva revealed that red fluorescence surrounding the adhesive on the tooth surface was distinctly observable from day five onwards, with ΔR > 30% and SHS levels higher than those of the control group without adhesive (p < 0.05). Observation of fluorescence images of isolated human premolar teeth with bonded brackets indicated that red fluorescence was primarily present around the brackets. CONCLUSIONS: Application of QLF is efficacious in identifying and demarcating adhesive residues within an environment rich in salivary microbiota.

Oral Porphyromonas gingivalis infection affects intestinal microbiota and promotes atherosclerosis.

AIM: The link between periodontitis and intestinal dysbiosis, two factors that contribute to atherosclerosis, has not been clearly defined. We investigated the integrative effects of oral infection with Porphyromonas gingivalis (PG), the major pathogen for periodontitis, on intestinal microbiota and atherosclerosis. MATERIALS AND METHODS: ApoE-/- mice were fed a normal chow diet (NC), a Western diet (WD) or a WD with oral PG infection (PG). The PG infection was investigated by placing a total of 109 CFUs of live PG into the oral cavity of each mouse using a feeding needle five times a week for 3 weeks. Atherosclerotic lesions of the aortae were measured, and blood lipoproteins and the expression of molecules related to lipid metabolism in the liver were analysed. We also performed 16S RNA sequencing and a microbiome analysis using faeces. RESULTS: En face bloc preparation of the aortae showed that the PG group had a 1.7-fold increase in atherosclerotic lesions compared with the WD group (p < .01). Serum analyses showed that oral PG infection induced a significant decrease in high-density lipoprotein (HDL) and triglyceride. Western blots of hepatic tissue lysates revealed that PG infection reduced the expression of scavenger receptor class B type 1 (SR-B1) in the liver by 50%. Faecal microbiota analysis revealed that species richness estimates (Chao1, ACE) decreased immediately after PG infection. PG infection also induced a significant decrease in Shannon diversity and an increase in Simpson's indices in the WD-fed mice. PG infection significantly increased the phyla Actinobacteria and Deferribacteres, along with the species Mucispirillum schaedleri and Lactobacillus gasseri, in the mice. The functional study showed that PG infection increased the expression of proteins that function in carbohydrate and glucose metabolism, including phosphotransferase system (PTS) proteins and the GntR family transcriptional regulator. CONCLUSIONS: Oral PG infection promotes atherosclerosis and induces significant metabolic changes, including reduced serum HDL and reduced hepatic SR-B1 and ABCA1 expression, as well as changes in intestinal microbiota. Our study suggests that intestinal dysbiosis accompanies periodontitis and could play a role in atherosclerosis.

Effect of strontium substitution on functional activity of phosphate-based glass.

Phosphate-based glass (PBG) is a bioactive agent, composed of a glass network with phosphate as the primary component and can be substituted with various therapeutic ions for functional enhancement. Strontium (Sr) has been shown to stimulate osteogenic activity and inhibit pro-inflammatory responses. Despite this potential, there are limited studies that focus on the proportion of Sr substituted and its impact on the functional activity of resulting Sr-substituted PBG (PSr). In this study, focusing on the cellular biological response we synthesized and investigated the functional activity of PSr by characterizing its properties and comparing the effect of Sr substitution on cellular bioactivity. Moreover, we benchmarked the optimal composition against 45S5 bioactive glass (BG). Our results showed that PSr groups exhibited a glass structure and phosphate network like that of PBG. The release of Sr and P was most stable for PSr6, which showed favorable cell viability. Furthermore, PSr6 elicited excellent early osteogenic marker expression and inhibition of pro-inflammatory cytokine expression, which was significant compared to BG. In addition, compared to BG, PSr6 had markedly higher expression of osteopontin in immunocytochemistry, higher ALP expression in osteogenic media, and denser alizarin red staining in vitro. We also observed a comparable in vivo regenerative response in a 4-week rabbit calvaria defect model. Therefore, based on the results of this study, PSr6 could be identified as the functionally optimized composition with the potential to be applied as a valuable bioactive component of existing biomaterials used for bone regeneration.

Dental students' perception of their educational environment in relation to their satisfaction with dentistry major: a cross-sectional study.

BACKGROUND: Students' perception of their educational environment and satisfaction with their major can reveal the extent of their readiness to practice their profession after graduation. This study aimed to evaluate dental students' perception of their educational environment and satisfaction with their major in dentistry, as well as the relationship between these two factors. METHODS: An online survey was conducted in 2022 among first- to fourth-year students across 11 dental schools in Korea. The Dundee Ready Education Environment Measure (DREEM) and Academic Major Satisfaction Scale (AMSS) were used to measure the students' perception of the educational environment and satisfaction with their major in dentistry, respectively. RESULTS: A total of 539 students participated in the survey (response rate = 18.1%). The overall mean scores of the DREEM and AMSS were 125.03 (maximum score 200) and 22.01 (maximum score 30), respectively. Fourth-year students had the lowest scores in the overall DREEM, DREEM subscales (excluding students' perceptions of atmosphere), and AMSS. The overall DREEM scores and all DREEM subscales showed statistically significant positive and moderate correlations with AMSS (p < 0.001). CONCLUSION: Using the DREEM, we identified areas that need improvement and the academic year (fourth year) that require proactive support. Considering the positive correlation between all DREEM subscales and the AMSS, measures to comprehensively improve the educational environment are needed to improve dental students' satisfaction with their major.

Dental Materials Applied to 3D and 4D Printing Technologies: A Review.

As computer-aided design and computer-aided manufacturing (CAD/CAM) technologies have matured, three-dimensional (3D) printing materials suitable for dentistry have attracted considerable research interest, owing to their high efficiency and low cost for clinical treatment. Three-dimensional printing technology, also known as additive manufacturing, has developed rapidly over the last forty years, with gradual application in various fields from industry to dental sciences. Four-dimensional (4D) printing, defined as the fabrication of complex spontaneous structures that change over time in response to external stimuli in expected ways, includes the increasingly popular bioprinting. Existing 3D printing materials have varied characteristics and scopes of application; therefore, categorization is required. This review aims to classify, summarize, and discuss dental materials for 3D printing and 4D printing from a clinical perspective. Based on these, this review describes four major materials, i.e., polymers, metals, ceramics, and biomaterials. The manufacturing process of 3D printing and 4D printing materials, their characteristics, applicable printing technologies, and clinical application scope are described in detail. Furthermore, the development of composite materials for 3D printing is the main focus of future research, as combining multiple materials can improve the materials' properties. Updates in material sciences play important roles in dentistry; hence, the emergence of newer materials are expected to promote further innovations in dentistry.

Antibacterial and Physicochemical Properties of Orthodontic Resin Cement Containing ZnO-Loaded Halloysite Nanotubes.

Demineralized white lesions are a common problem when using orthodontic resin cement, which can be prevented with the addition of antibacterial substances. However, the addition of antibacterial substances such as zinc oxide alone may result in the deterioration of the resin cement's functions. Halloysite nanotubes (HNTs) are known to be biocompatible without adversely affecting the mechanical properties of the material while having the ability to load different substances. The purpose of this study was to prepare orthodontic resin cement containing HNT fillers loaded with ZnO (ZnO/HNTs) and to investigate its mechanical, physical, chemical, and antibacterial properties. A group without filler was used as a control. Three groups containing 5 wt.% of HNTs, ZnO, and ZnO/HNTs were prepared. TEM and EDS measurements were carried out to confirm the morphological structure of the HNTs and the successful loading of ZnO onto the HNTs. The mechanical, physical, chemical, and antibacterial properties of the prepared orthodontic resin cement were considered. The ZnO group had high flexural strength and water absorption but a low depth of cure (p < 0.05). The ZnO/HNTs group showed the highest shear bond strength and film thickness (p < 0.05). In the antibacterial test, the ZnO/HNTs group resulted in a significant decrease in the biofilm's metabolic activity compared to the other groups (p < 0.05). ZnO/HNTs did not affect cell viability. In addition, ZnO was cytotoxic at a concentration of 100% in the extract. The nanocomposite developed in this study exhibited antimicrobial activity against S. mutans while maintaining the mechanical, physical, and chemical properties of orthodontic resin cement. Therefore, it has the potential to be used as an orthodontic resin cement that can prevent DWLs.

Novel antibacterial and apatite forming restorative composite resin incorporated with hydrated calcium silicate.

BACKGROUND: White Portland cement is a calcium silicate material. It exhibits antibacterial properties and is biocompatible. In addition, calcium silicate-based materials are known to release calcium ions and form apatite. The purpose of this study was to develop a novel bioactive restorative resin composite with antibacterial and apatite forming properties to prevent tooth caries at the interface of teeth and restorative materials, by incorporation of hydrated calcium silicate (hCS) derived from white Portland cement. METHODS: To prepare the experimental composite resins, a 30 wt% light-curable resin matrix and 70 wt% filler, which was mixed with hCS and silanized glass powder were prepared in following concentrations: 0, 17.5, 35.0, and 52.5 wt% hCS filler. The depth of cure, flexural strength, water sorption, solubility, and antibacterial effect were tested. After immersion in artificial saliva solution for 15, 30, 60, and 90 days, ion concentration by ICP-MS and apatite formation using SEM-EDS, Raman spectroscopy and XRD from experimental specimens were analyzed. RESULTS: All experimental groups showed clinically acceptable depths of cure and flexural strength for the use as the restorative composite resin. Water sorption, solubility, released Ca and Si ions increased with the addition of hCS to the experimental composite resin. Experimental groups containing hCS showed greater antibacterial effects compared with the 0 wt% hCS filler group (p < 0.05). The 52.5 wt% hCS filler group produced precipitates mainly composed of Ca and P detected as hydroxyapatite after immersion in artificial saliva solution for 30, 60, and 90 days. CONCLUSIONS: This results show that composite resins containing hCS filler is effective in antibacterial effects. hCS has also apatite formation ability for reducing gap size of microleakage by accumulating hydroxyapatite precipitates at the restoration-tooth interface. Therefore, novel composite resin containing hCS is promising bioactive resin because of its clinically acceptable physiochemical properties, antibacterial properties, and self-sealing potential for prevention of microleakage for longer usage of restorations.

Effect of bacterial resistant zwitterionic derivative incorporation on the physical properties of resin-modified glass ionomer luting cement.

Biofilms induce microbial-mediated surface roughening and deterioration of cement. In this study, zwitterionic derivatives (ZD) of sulfobetaine methacrylate (SBMA) and 2-methacryloyloxyethyl phosphorylcholine, were added in concentrations of 0, 1, and 3% to three different types of commercially available resin-modified glass ionomer cement (RMGIC) (RMC-I: RelyX Luting 2, RMC-II: Nexus RMGI, and RMC-III: GC FujiCEM 2). The unmodified RMGICs served as the control group for comparison. The resistance of Streptococcus mutans to ZD-modified RMGIC was evaluated with a monoculture biofilm assay. The following physical properties of the ZD-modified RMGIC were assessed: wettability, film thickness, flexural strength, elastic modulus, shear bond strength, and failure mode. The ZD-modified RMGIC significantly inhibited biofilm formation, with at least a 30% reduction compared to the control group. The addition of ZD improved the wettability of RMGIC; however, only 3% of the SBMA group was statistically different (P < 0.05). The film thickness increased in proportion to the increasing ZD concentrations; there was no statistical difference within the RMC-I (P > 0.05). The experimental groups' flexural strength, elastic modulus, and shear bond strength showed an insignificant decrease from the control group; there was no statistical difference within the RMC-I (P > 0.05). The mode of failure differed slightly in each group, but all groups showed dominance in the adhesive and mixed failure. Thus, the addition of 1 wt.% ZD in RMGIC favorably enhanced the resistance to Streptococcus mutans without any tangible loss in flexural and shear bond strength.

Cerium oxide nanozymes confer a cytoprotective and bio-friendly surface micro-environment to methacrylate based oro-facial prostheses.

Poly-(methyl methacrylate) (PMMA) is the preferred biomaterial for orofacial prostheses used for the rehabilitation of naso-palatal defects. However, conventional PMMA has limitations determined by the complexity of the local microbiota and the friability of oral mucosa adjacent to these defects. Our purpose was to develop a new type of PMMA, i-PMMA, with good biocompatibility and better biological effects such as higher resistance to microbial adhesion of multiple species and enhanced antioxidant effect. The addition of cerium oxide nanoparticles to PMMA using a mesoporous nano-silica carrier and polybetaine conditioning, resulted in an increased release of cerium ions and enzyme mimetic activity, without tangible loss of mechanical properties. Ex vivo experiments confirmed these observations. In stressed human gingival fibroblasts, i-PMMA reduced the levels of reactive oxygen species and increased the expression of homeostasis-related proteins (PPARg, ATG5, LCI/III). Furthermore, i-PMMA increased the levels of expression of superoxide dismutase and mitogen-activated protein kinases (ERK and Akt), and cellular migration. Lastly, we demonstrated the biosafety of i-PMMA using two in vivo models: skin sensitization assay and oral mucosa irritation test, respectively. Therefore, i-PMMA offers a cytoprotective interface that prevents microbial adhesion and attenuates oxidative stress, thus supporting physiological recovery of the oral mucosa.

Multistability and hysteresis in states of oral microbiota: Is it impacting the dental clinical cohort studies?

INTRODUCTION: Microbiome from a "healthy cohort" is used as a reference for comparison to cases and intervention. However, the studies with cohort-based clinical research have not sufficiently accounted for the multistability in oral microbial community. The screening is limited to phenotypic features with marked variations in microbial genomic markers. Herein, we aimed to assess the stability of the oral microbiome across time from an intervention-free "healthy" cohort. METHODS: We obtained 33 supragingival samples of 11 healthy participants from the biobank. For each participant, we processed one sample as baseline (T0) and two samples spaced at 1-month (T1) and 3-month (T2) intervals for 16S ribosomal RNA gene sequencing analysis. RESULTS: We observed that taxonomic profiling had a similar pattern of dominant genera, namely, Rothia, Prevotella, and Hemophilus, at all time points. Shannon diversity revealed a significant increase from T0 (p < .05). Bray Curtis dissimilarity was significant (R = -.02, p < .01) within the cohort at each time point. Community stability had negative correlation to synchrony (r = -.739; p = .009) and variance (r = -.605; p = .048) of the species. Clustering revealed marked differences in the grouping patterns between the three time points. For all time points, the clusters presented a substantially dissimilar set of differentially abundant taxonomic and functional biomarkers. CONCLUSION: Our observations indicate towards the presence of multistable states within the oral microbiome in an intervention-free healthy cohort. For a conclusive and meaningful long-term reference, dental clinical research should account for multistability in the personalized therapy approach to improve the identification and classification of reliable markers.

Changes in mechanical and bacterial properties of denture base resin following nanoceria incorporation with and without SBA-15 carriers.

Poly (methyl methacrylate) (PMMA) is a commonly used material for the fabrication of biomedical appliances. Although PMMA has several advantages, it is susceptible to microbial insults with practical use. Therefore, different bioactive nanomaterials, such as nanoceria (CeN), have been proposed to enhance the properties of PMMA. In this study, we investigated the effect of the incorporation of CeN into PMMA with and without the use of mesoporous silica nanoparticle (SBA-15) carriers. The unmodified PMMA specimens (control, CTRL) were compared to groups containing SBA-15, CeN, and the synthesized SBA-15 impregnated with CeN (SBA-15@CeN) at different loading percentages. The mechanical and physical properties of the different SBA-15@CeN groups and their effects on cell viability were investigated, and the optimal CeN concentration was identified accordingly. Our results revealed that flexural strength was significantly (P < 0.01) reduced in the SBA-15@CeN3× group (containing 3-fold the CeN wt. %). Although the surface microhardness increased with the increase in the wt. % of SBA-15@CeN, cell viability was significantly reduced (P < 0.001). The SBA-15@CeN1× group had the optimal concentration and displayed significant resistance to single-and multispecies microbial colonization. Finally, the enzymatic activity of CeN was significantly high in the SBA-15@CeN1× group. The proinflammatory markers (IL-6, IL-1ß, TNF-α, CD80, and CD86) showed a significant (P < 0.001) multifold reduction in lipopolysaccharide-induced RAW cells treated with a 5-day eluate of the SBA-15@CeN1× group. These results indicate that the addition of SBA-15@CeN at 1.5 wt % improves the biological response of PMMA without compromising its mechanical properties.

Effects of limb apraxia intervention in patients with stroke: A meta-analysis of randomized controlled trials.

OBJECTIVE: Limb apraxia, a complication of stroke, causes difficulties in performing activities of daily living (ADL). To date, there are no studies on the effectiveness of limb apraxia interventions. We conducted a meta-analysis to assess the effectiveness of limb apraxia interventions in reducing its severity and improving ADL. METHODS: We conducted a search of randomized controlled trials (RCTs) related to limb apraxia till December 2021 using the databases of PubMed, Embase, CINAHL, and the Cochrane Library. We measured the outcome variables in the subgroups of total apraxia (TA), ideational apraxia (IA), ideomotor apraxia (IMA), and ADL. The Physiotherapy Evidence Database (PEDro) scale was used to assess the quality. RESULTS: Five RCTs were selected, and of the 310 participants, 155 were in the experimental and 155 in the control group. A random-effects model was used for the effect size distribution. The limb apraxia intervention methods included gesture and strategy training (three and two studies, respectively). The effect sizes of the outcome variables in the subgroups were small for the TA and IA, with 0.475 (95% confidence interval [CI]: -0.151-1.102; p = 0.137) and 0.289 (95% CI: -0.144-0.722; p = 0.191), respectively. IMA had a medium effect size of 0.731 (95% CI: -0.062-1.525; p = 0.071), not statistically significant, whereas ADL effect size was small and statistically significant, 0.416 (95% CI: 0.159-0.673; p = 0.002). CONCLUSIONS: Gesture and strategy training had statistically significant effects on ADL as limb apraxia interventions. Therefore, the effectiveness of the apraxia interventions needs to be further evaluated through continuous RCTs.

Polybetaine-enhanced hybrid ionomer cement shows improved total biological effect with bacterial resistance and cellular stimulation.

Hybrid ionomer cements (HICs) are aesthetic polyelectrolyte cements that have been modified with a resin. The setting of HICs occurs by both monomer polymerization and an acid-base reaction. In addition, HICs contain a resin, which is substituted for water. Thus, the competition between the setting reactions and reduced water content inherently limits polysalt formation and, consequently the bioactive interactions. In this study, we explored the effects of polybetaine zwitterionic derivatives (mZMs) on the augmentation of the bioactive response of HICs. The polybetaines were homogenized into an HIC in different proportions (α, ß, and γ) at 3% w/v. Following basic characterization, the bioactive response of human dental pulp stem cells (hDPSCs) was evaluated. The augmented release of the principal constituent ions (strontium, silica, and fluoride) from the HIC was observed with the addition of the mZMs. Modification with α-mZM elicited the most favorable bioactive response, namely, increased ion elution, in vitro calcium phosphate precipitation, and excellent biofouling resistance, which deterred the growth of the bridging species of Veillonella. Moreover, α-mZM resulted in a significant increase in the hDPSC response, as confirmed by a significant increase (p < 0.05) in alizarin red staining. The results of mRNA expression tests, performed using periodically refreshed media, showed increased and early peak expression levels for RUNX2, OCN, and OPN in the case of α-mZM. Based on the results of the in vitro experiments, it can be concluded that modification of HICs with polybetaine α-mZM can augment the overall biological response.

Comparative assessment of marginal and internal gaps of cast-free monolithic zirconia crowns fabricated from 2 intraoral scanners: A prospective, double-blind, randomized clinical trial.

STATEMENT OF PROBLEM: Despite the introduction of intraoral scanners (IOSs) with dual camera triangulation, only a few comparative clinical studies have evaluated their clinical performances in the digital workflow for cast-free restorations. PURPOSE: The purpose of this clinical trial was to assess the clinical efficacy of 2 different technology-based IOSs by evaluating the marginal and internal gaps of cast-free monolithic zirconia crowns fabricated by using a fully digital workflow. MATERIAL AND METHODS: A prospective randomized clinical trial was conducted in 35 participants requiring a single-unit restoration. One crown was fabricated from the scan data obtained with a confocal microscopy-based IOS (Group T), while the other was made with the scan data obtained from an IOS using dual camera triangulation (Group I). A replica technique was used to assess the marginal and internal gaps. The buccolingual and mesiodistal cross-sections were measured, and noninferiority trials were performed. RESULTS: A total of 39 teeth from 35 participants were restored with a single-unit crown. The marginal and axial wall gaps of the crowns in Group I was not inferior to that of the crowns in Group T (upper limit confidence interval [CI] <30). In contrast, the gap of the crowns at the line angle in Group T was inferior to that of the crowns in Group I (lower limit CI <-30). From an occlusal space perspective, the gap of the crowns in Group I was inferior to that of the crowns in Group T (upper limit CI >30). Twenty-five crowns were selected from Group I, and 14 crowns were selected from Group T for definitive placement. CONCLUSIONS: The marginal gap of the crown fabricated by using the scan data obtained from the dual camera triangulation-based IOS was noninferior to that obtained from the confocal microscopy-based IOS and was within the clinically applicable limit.